Physical Characteristics of Soil

Soil Classification: Soil explorations, that are to be carried out to the required extent and then to be appropriately evaluated, form the basis for the structural calculations of already existing, newly to be laid, or to be rehabilitated drains, sewers and associated structures by means of the open cut or trenchless method of construction. For these applications, [[ASTM D2487-06]] classifies the types of soils as follows:<ul><li> Category I: Clean, course grained soils: SW, …</li></ul>
Soil Classification (2): For the design of sloping or benching systems, the Occupational Safety and Health Administration (OSHA) classifies soils from excavation operations as presented in the table below.The soil classification, according to [[OSHA 29 CFR 1926 Subpart P App A]], are based on the definitions in whole or in part, the following; American Society for Testing Materials (ASTM) Standards D653-85 and D2488; The Unified Soils Classification System; The U.S. Department …
Non-Cohesive Soil Classification: The table below presents the classification of non-cohesive soils for engineering purposes based on particle size, coefficient of uniformity (Cu) and coefficient of curvature (Cc) [[ASTM D2487-06]].(Table: Non-cohesive soil classification as per ASTM D2487)
Cohesive Soil Classification: The following table presents classification of cohesive soils for engineering purposes based on particle size, coefficient of uniformity (Cu) and coefficient of curvature (Cc) [[ASTM D2487-06]]. Cohesive soils do not crumble, are hard to break up when dry and include clayey silts, sandy clays, silty clays, and clays.(Table: Cohesive soil classification as per ASTM D2487)
Organic Soil Classification: Organic soils are classified as per [[ASTM D2487-06]] according to the table below.(Table: Organic soil classification as per ASTM D2487)
Organic Fine-Grained Soil Classification: Organic fine-grained soils have a 50% or more passing rate through a No.200 sieve. Organic clays and organic silts are soils that would be classified as clay or silt, except that their liquid limit values after oven drying is less than 75 % of their liquid limit value before oven drying [[ASTM D2487-06]].The table below presents a classification of organic fine-grained soils (OL and OH).(Table: Classification of organic fine-grained soil (50% or …
Soil Classification as per EN ISO 14688-1: A simpler differentiation is done in European standard [DINENISO14688:2004].This standard differentiates soils based on soil type, designation and grain size.(Table: Soil type and grain size fractions as per EN ISO 14688-1)
Soil Classification as per AASHTO: The main aim of The American Association of State Highway and Transportation Officials (AASHTO) and the Federal Highway Administration (FHWA) soil classification system is to have a system appropriate for highway sub-grade materials based on their performance. The AASHTO System has seven soil classes including A-1 to A-7. The soil is placed in the classes based on performance characteristics. A-1 is the highest and A-7 is the lowest. A-1 to A-3 are …
Tunnelman's Ground Classification System (TGCS): Terzaghi at 1950 for the first time provided the Tunnelman’s Ground Classification system which became famous as a common and functional tunneling classification of soft ground, and later Heuer in 1974 refined it. Tunnelman’s Ground Classification System was designed to explain different ground performances and their effect on larger, conventionally constructed soft ground tunnels. This system is also a powerful tool to evaluate the soft ground conditions …
Soil Compactibility Classes: This page presents the assignment of different soil types to three compactibility classes based on German standards. As per ASTM, non-cohesive to cohesive soils as well as coarse-grained and mixed soils (sand and gravel) have good compactibility characteristics.(Table: Compactibility class V1 to V3 as per ZTVA-StB 97)In this context, the tabular information on the classification of soils for civil engineering purposes in this (→ Table: Soil classification …
Soil Compactibility Classes (2): Based on the previous page, a finer differentiation and assignment of compactibility classes and soil types is done based on German standard which is used for the structural calculation of pipelines [ATVA127].(Table: Soil Classification (DWA-A 139))Further soil characteristics according to EAU 1996 can be found in the following (→ Table: Soil characteristics draft (e 9) of EAU 1996)
Cohesive Soil Characteristics: (Table: Soil characteristics for cohesive soil, calculated values according to DIN 1055)